Users Guide

Parameters
● vrf vrf-name — (OPTIONAL) Enter vrf then the name of the VRF to clear IPv4 or IPv6 BGP
neighbor sessions corresponding to that VRF.
● IPv4–address — Enter an IPv4 address to clear a BGP neighbor configuration.
● IPv6–address — Enter an IPv6 address to clear a BGP neighbor configuration.
● * — Clears all BGP sessions.
● interface interface-type — Clears BGP information that is learned through an unnumbered
neighbor. Enter one of the following interface types:
○ ethernet node/slot/port[:subport] — Display Ethernet interface information.
○ port-channel id-number — Display port channel interface IDs, from 1 to 128.
○ vlan vlan-id — Display the VLAN interface number, from 1 to 4093.
● soft — (Optional) Enter to configure and activate policies without resetting the BGP TCP session
— BGP soft reconfiguration.
● in — (Optional) Enter to activate only ingress (inbound) policies.
Default Not configured
Command Mode EXEC
Usage
Information
None.
Example
OS10# clear ip bgp 1.1.15.4
The following is an example to clear BGP information learned through an unnumbered neighbor:
OS10# clear ip bgp interface ethernet 1/1/1
Supported
Releases
10.3.0E or later
clear ip bgp *
Resets BGP sessions. The soft parameter, BGP soft reconfiguration, clears policies without resetting the TCP connection.
Syntax
clear ip bgp * [soft in]
Parameters
● * — Enter to clear all BGP sessions.
● soft — (Optional) Enter to configure and activate policies without resetting the BGP TCP session
— BGP soft reconfiguration.
● in — (Optional) Enter to activate only ingress (inbound) policies.
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# clear ip bgp *
Supported
Releases
10.3.0E or later
clear ip bgp dampening
Clears the path information of the dampened and undampened prefixes.
Syntax
clear ip bgp dampening [vrf vrf-name] [ipv4–prefix | ipv6–prefix]
Parameters
● vrf vrf-name — (OPTIONAL) Enter vrf then the name of the VRF to clear dampened paths
information.
Layer 3 663