Users Guide

(*, 225.1.1.1), flags: S
Incoming interface: Vlan 502
outgoing interface list:
Vlan 2002 (S)
(2.2.2.2, 225.1.1.1), flags: S
Incoming interface: Vlan 501
outgoing interface list:
Vlan 1000, Vlan 2003 (S)
OS10# show ip pim mcache
PIM Multicast Routing Cache Table
(*, 225.1.1.1)
Incoming interface : vlan105
Outgoing interface list :
vlan121
(101.1.1.10,225.1.1.1)
Incoming interface : vlan103
Outgoing interface list :
vlan121
Supported
Releases
10.4.3.0 or later
show ip pim neighbor
Displays PIM neighbors.
Syntax
show ip pim [vrf vrf-name] neighbor
Parameters
vrf vrf-name—Enter the keyword vrf, then the name of the VRF.
Default None
Command Mode EXEC
Usage
Information
This command displays the following:
● Neighbor address—IP addresses of the PIM neighbor
● Interface—Interface type with slot/port information or VLAN/Port Channel ID of the PIM neighbor
● Uptime/expires—Amount of time that the PIM neighbor has been up
● Version—PIM version number; v2 for PIM version 2
● DR priority/Mode—Designated router priority value and mode. The default designated router priority is 1
and S for sparse mode
Example
OS10# show ip pim neighbor
Neighbor Address Interface Uptime/Expires Ver DR Priority/Mode
-------------------------------------------------------------------------------
2.1.1.1 vlan103 13:05:58/00:01:19 v2 1 / S
3.1.1.1 vlan105 13:05:58/00:01:17 v2 1 / S
Supported
Releases
10.4.3.0 or later
show ip pim rp
Displays brief information about all multicast group to RP mappings.
Syntax
show ip pim [vrf vrf-name] rp [mapping | group-address]
Parameters
● vrf vrf-name—Enter the keyword vrf, then the name of the VRF.
● mapping—Enter the keyword mapping to display the multicast groups to RP mapping and
information about how RP is learned.
Multicast 865