Users Guide

Processor 5Sec(%) 1Min(%) 5Min(%)
High Low High Low High Low
==================================================
Overall 0 0 10 5 80 70
CPU Utilization commands
show processes cpu
Displays information about CPU usage for processes running in the system.
Syntax
show processes cpu {summary | num-of-tasks}
Parameters
● summary—Display a summary of CPU usage.
● num-of-tasks—Specify the number of tasks to display in order of the highest CPU usage in the
past 5 seconds, 1 minute, and 5 minutes. The valid values are from 1 to 99.
Defaults None
Command Mode EXEC
Usage
Information
None
Example
(summary)
OS10# show processes cpu summary
CPU Utilization 5Sec(%) 1Min(%) 5Min(%)
------------------------------------------------------
UNIT1 7.79 7.61 7.79
Example (number
of tasks)
OS10# show processes cpu 4
CPU Statistics of Unit 1
========================
CPUID 5Sec(%) 1Min(%) 5Min(%)
-------------------------------------------
Overall 9.09 8.58 9.09
PID Process Runtime(s) 5sec(%) 1min(%) 5min(%)
1387 dn_sm 243346 1.4 1.4 1.4
955 dn_pas_svc 243354 0.6 0.6 0.6
959 dn_dot1x 243354 0.2 0.2 0.2
1374 dn_lacp 243346 0.2 0.2 0.2
Supported
Releases
10.5.2.0 or later
show util-threshold cpu
Displays the configured CPU utilization threshold values.
Syntax
show util-threshold cpu
Parameters None
Defaults None
Command Mode EXEC
Usage
Information
This command displays the CPU utilization thresholds that trigger alarms. When the CPU utilization
percentage across different time durations crosses the threshold values, an alarm generates. To
reconfigure the threshold values, use the util-threshold cpu command.
Troubleshoot Dell EMC SmartFabric OS10 1821