Users Guide

● ip-selection — Enables IPv4 key parameters to use in the hash computation.
● ipv6-selection — Enables IPV6 key parameters to use in hash computation.
● destination-ip — Enables the destination IP address in the hash calculation.
● source-ip — Enables the source IP address in the hash calculation.
● protocol — Enables protocol information in the hash calculation.
● vlan-id — Enables VLAN ID information in the hash calculation.
● l4-destination-port — Enables Layer 4 (L4) destination port information in the hash
calculation.
● l4-source-port — Enables L4 source port information in the hash calculation.
● mac-selection — Enables MAC load-balancing configurations.
● destination-mac— Enables destination MAC information in the hash calculation.
● source-mac— Enables source MAC information in the hash calculation.
● ethertype — Enables Ethernet type information in the hash calculation.
Default
● ip-selelection—source—ip dest-ip vlan-id l4–source-port l4–dest-port ipv4
protocol
● ipv6-selection—source—ipv6 dest-ipv6 vlan—id l4–source-port l4–dest-port
ipv6 protocol
● mac-selection—source—mac destination—mac vlan-id ethertype
● tcp-udp-selection—l4–source-port l4–dest-port
Command Mode CONFIGURATION
Usage
Information
● IPv4– selection: source-ip destination-ip protocol vlan-id l4-destination-port
l4-source-port
● IPv6 destination address: source-ip destination-ip protocol vlan-id l4-
destination-port l4-source-port
● MAC parameters: source-mac destination-mac ethertype vlan-id
● TCP/UDP parameters: l4-destination-port l4-source-port
The no version of this command resets the value to the default.
Example
(Ingress)
OS10(config)# load-balancing ingress-port enable
Example (IP
Selection)
OS10(config)# load-balancing ip-selection destination-ip source-ip
Supported
Releases
10.2.0E or later
show enhanced-hashing resilient-hashing
Displays the status of the enhanced-hashing command.
Syntax
show enhanced-hashing resilient-hashing {lag | ecmp}
Parameters lag | ecmp—Enter the keyword to view enhanced-hashing for a port channel or ECMP group.
Default Disabled
Command Mode EXEC
Usage
Information
None
Example
OS10# show enhanced-hashing resilient-hashing lag
Resilient Hashing Configuration For LAG:
894 Layer 3