Reference Guide

Example
OS10# clear fc statistics vfabric 100
OS10# clear fc statistics interface fibrechannel1/1/25
Supported
Releases
10.4.1.0 or later
fcoe
Adds FCoE parameters to vfabric.
Syntax
fcoe {fcmap fc-map | fcf-priority fcf-priority-value | fka-adv-period adv-
period | vlan-priority vlan-priority-value | keep-alive}
Parameters
● fc-map — Enter the FC map ID, ranging from 0xefc00-0xefcff.
● fcf-priority-value — Enter the FCF priority value, ranging from 1 to 255.
● adv-period — Enter the FCF keepalive advertisement period ranging from 8 to 90 seconds.
● vlan-priority-value — Enter the VLAN priority value, ranging from 0 to 7.
Defaults
● fcmap—0x0EFC00
● fcf-priority—128
● fka-adv-period—8
● vlan-priority—3
● keep-alive—True
Command Mode Vfabric CONFIGURATION
Usage
Information
The no version of this command disables the FCoE parameters.
Example
OS10(config)# vfabric 10
OS10(conf-vfabric-10)# name 10
OS10(conf-vfabric-10)# fcoe fcmap 0x0efc01
OS10(conf-vfabric-10)# fcoe fcf-priority 128
OS10(conf-vfabric-10)# fcoe fka-adv-period 8
OS10(conf-vfabric-10)# fcoe vlan-priority 3
Supported
Releases
10.3.1E or later
name
Configures a vfabric name.
Syntax
name vfabric-name
Parameters vfabric-name — Enter a name for the vfabric.
Defaults Not configured
Command Mode Vfabric CONFIGURATION
Usage
Information
The no version of this command removes the vfabric name..
Example
OS10(config)# vfabric 100
OS10(conf-vfabric-100)# name test_vfab
Supported
Releases
10.3.1E or later
132 Fibre Channel