Reference Guide

example, Port Identifier=0x8000,0x101, where the port priority value is 0x8000 and the port
number value is 0x101.
Example
OS10# show lacp interface ethernet 1/1/129
Invalid Port id, Max. Port Id is: 32
OS10# show lacp interface ethernet 1/1/29
Interface ethernet1/1/29 is up
Channel group is 1 port-channel is po1
PDUS sent: 365
PDUS rcvd: 17
Marker sent: 0
Marker rcvd: 0
Marker response sent: 0
Marker response rcvd: 0
Unknown packetse rcvd: 0
Illegal packetse rcvd: 0
Local Port: ethernet1/1/29 MAC Address=90:b1:1c:f4:9b:8a
System Identifier=32768,32768
Port Identifier=32768,32768
Operational key=1
LACP_Activity=passive
LACP_Timeout=Long Timeout(30s)
Synchronization=IN_SYNC
Collecting=true
Distributing=true
Partner information refresh timeout=Long Timeout(90s)
Actor Admin State=BCFHJKNO
Actor Oper State=BDEGIKNO
Neighbor: 178
MAC Address=00:00:00:00:00:00
System Identifier=,00:00:00:00:00:00
Port Identifier=0,00:01:e8:8a:fd:9e
Operational key=1
LACP_Activity=passive
LACP_Timeout=Long Timeout(30s)
Synchronization=IN_SYNC
Collecting=true
Distributing=true
Partner Admin State=BCEGIKNP
Partner Oper State=BDEGIKMO
Supported
Releases
10.2.0E or later
show lacp neighbor
Displays information about LACP neighbors.
Syntax
show lacp neighbor [interface port-channel channel-number]
Parameters
● interface port-channel — (Optional) Enter the interface port-channel.
● channel-number — (Optional) Enter the port-channel number for the LACP neighbor (1 to 128).
Default Not configured
Command Mode EXEC
Usage
Information
All channel groups display if you do not enter the channel-number parameter.
Example
OS10# show lacp neighbor interface port-channel 1
Flags:S-Device is sending Slow LACPDUs F-Device is sending Fast LACPdus
A-Device is in Active mode P-Device is in Passive mode
Port-channel port-channel1 neighbors
Port: ethernet1/1/29
Partner System Priority: 32768
168 Layer 2