Reference Guide

Parameters description — Enter a text string to identify the VLAN (up to 80 characters).
Default Not configured
Command Mode INTERFACE-VLAN
Usage
Information
None
Example
OS10(conf-if-vlan)# description vlan3
Supported
Releases
10.2.0E or later
interface vlan
Creates a VLAN interface.
Syntax
interface vlan vlan-id
Parameters vlan-id — Enter the VLAN ID number (1 to 4093).
Default VLAN 1
Command Mode CONFIGURATION
Usage
Information
FTP, TFTP, MAC ACLs, and SNMP operations are not supported — IP ACLs are supported on VLANs
only. The no version of this command deletes the interface.
Example
OS10(config)# interface vlan 10
OS10(conf-if-vl-10)#
Supported
Releases
10.2.0E or later
show vlan
Displays VLAN configurations.
Syntax
show vlan vlan-id
Parameters vlan-id — (Optional) Enter a VLAN ID number (1 to 4093).
Default Not configured
Command Mode EXEC
Usage
Information
Use this command to view VLAN configuration information for a specific VLAN ID.
Example
OS10(config)# do show vlan
Codes: * - Default VLAN, M - Management VLAN, R - Remote Port Mirroring
VLANs
Q: A - Access (Untagged), T - Tagged
NUM Status Description Q Ports
* 1 Active A Eth1/1/15
A Po100
2101 Active T Eth1/1/1,1/1/3
T Po100
2102 Active T Eth1/1/1,1/1/3
Supported
Releases
10.2.0E or later
242 Layer 2