Reference Guide

clear Clear command
clock Configure the system clock
commit Commit candidate configuration
configure Enter configuration mode
copy Perform a file copy operation
debug Debug command
delete Perform a file delete operation on local file system
dir Show the list of files for the specified system folder
discard Discard candidate configuration
exit Exit from the CLI
generate Command to generate executed functionality
help Display available commands
image Image commands
kill-session Kill a CLISH session
license License and digital fulfillment commands
location-led Set location LED
lock Lock candidate configuration
move Perform a file move/rename operation on local filesystem
no No commands under exec mode
ping ping -h shows help
ping6 ping6 -h shows help
reload Reboot Dell EMC Networking Operating System
show Show running system information
start Activate transaction based configuration
support-assist-activity Support Assist related activity
system System command
terminal Set terminal settings
traceroute traceroute --help shows help
unlock Unlock candidate configuration
validate Validate candidate configuration
write Copy from current system configuration
2. Enter CONFIGURATION mode.
OS10# configure terminal
OS10(config)#
3. Enter ? to show the commands available in CONFIGURATION mode.
OS10(config)# ?
aaa Configure AAA
alias Set alias for a command
class-map Configure class map
clock Configure clock parameters
control-plane Control-plane configuration
crypto Crypto commands
dcbx DCBX commands
dot1x Configure dot1x global information
end Exit to the exec Mode
eula-consent eula-consent configuration
exec-timeout Set timeout (in seconds) for all CLI sessions
exit Exit from current mode
feature Enable feature
hash-algorithm Hash algorithm configurations
help Display available commands
host-description Set the system host description
hostname Set the system hostname
interface Select an interface
ip Global IP configuration subcommands
ipv6 Configure ipv6
iscsi enable iscsi globally
lacp LACP commands
line Configure a terminal line
link-bundle-utilization Configure link bundle utilization trigger threshold
lldp Configure LLDP parameters
load-balancing Load balancing configurations
logging Logging commands
login-statistics Configure login statistics
mac MAC Address Table Configuration Subcommands
management management interface commands
monitor Create a session for monitoring traffic
no To delete / disable commands in config mode
ntp Configure NTP
36
Getting Started