Reference Guide

show openflow
To display general information related to OpenFlow that is applicable to the switch and the logical switch instance.
Syntax
show openflow
Parameters None
Default None
Command Mode EXEC
Usage
Information
None
Example
OS10# show openflow
Manufacturer : DELL
Hardware Description : Z9100-ON
Software Description : Dell Networking OS10-Premium, Dell
Networking Application Software Version: 10.4.1.0X
Serial Number : CN0V1W3RCES0079L0018
Capabilities : port, table, flow
Switch mode : openflow-only
Match fields :
Layer-1 : in-port
Layer-2 : eth-src, eth-dst, eth-type, vlan-id, vlan-pcp
Layer-3 : ipv4-src, ipv4-dst, ip-protocol, ip-dscp, ip-ecn
Layer-4 : tcp-src, tcp-dst, udp-src, udp-dst, icmpv4-type, icmpv4-
code
Instructions : apply-actions, write-actions
Actions : output, set-field
Set field actions : eth-src, eth-dst, vlan-id, vlan-pcp,
ip-dscp
TLS parameters :
certificate identifying trustworthy controller : /config/etc/opt/
dell/os10/openflow/cacert.pem
certificate identifying trustworthy switch : /config/etc/opt/
dell/os10/openflow/sc-cert.pem
private key : /config/etc/opt/
dell/os10/openflow/sc-privkey.pem
Supported
Releases
10.4.1 or later
show openflow flows
To display the OpenFlow flows for a specific logical switch instance.
Syntax
show openflow switch logical-switch-name flows
Parameters logical-switch-name—Enter the logical switch instance name for which you want to view the flow
information.
Default None
Command Mode EXEC
Usage
Information
None
Example
OS10# show openflow switch of-switch-1 flows
Logical switch name: of-switch-1
Total flows: 1
Flow: 0
Table ID: 0, Table: Ingress ACL TCAM table
OpenFlow 555