Reference Guide

Flow ID: 0
Priority: 32768, Cookie: 0
Hard Timeout: 0, Idle Timeout: 0
Packets: 0, Bytes: 0
Match Parameters:
In Port: ethernet1/1/1
EType: 0x800
SMAC: 00:0b:c4:a8:22:b0/ff:ff:ff:ff:ff:ff
DMAC: 00:0b:c4:a8:22:b1/ff:ff:ff:ff:ff:ff
VLAN id: 2/4095
VLAN PCP: 1
IP DSCP: 4
IP ECN: 1
IP Proto: 1
Src Ip: 10.0.0.1/255.255.255.255
Dst Ip: 20.0.0.1/255.255.255.255
ICMPv4 Type: 1
ICMPv4 Code: 10
L4 Src Port: *
L4 Dst Port: *
Apply-Actions: Output= ethernet1/1/2, ethernet1/1/3:1
Write-Actions: Drop
Supported
Releases
10.4.1 or later
show openflow ports
To display the openflow ports for a specific logical switch instance.
Syntax
show openflow switch logical-switch-name ports
Parameters logical-switch-name—Name of the logical switch instance whose port information you want to view.
Default None
Command Mode EXEC
Usage
Information
None
Example
OS10# show openflow switch of-switch-1 ports
Logical switch name: of-switch-1
Interface Name of-port ID Config-State Link-State SPEED
DUPLEX AUTONEG TYPE
ethernet1/1/1 1 PORT_UP(CLI) LINK_UP 40GB
FD YES COPPER
ethernet1/1/2 5 PORT_UP(CLI) LINK_UP 40GB
FD YES COPPER
ethernet1/1/3:1 9 PORT_UP(CLI) LINK_UP 10GB
FD NO FIBER
ethernet1/1/3:2 10 PORT_UP(CLI) LINK_DOWN 0MB
FD NO FIBER
ethernet1/1/3:3 11 PORT_UP(CLI) LINK_DOWN 0MB
FD NO FIBER
ethernet1/1/3:4 12 PORT_UP(CLI) LINK_DOWN 0MB
FD NO FIBER
ethernet1/1/4 13 PORT_UP(CLI) LINK_UP 40GB
FD YES COPPER
ethernet1/1/5:1 17 PORT_UP(CLI) LINK_UP 10GB
FD NO FIBER
ethernet1/1/5:2 18 PORT_UP(CLI) LINK_DOWN 0MB
FD NO FIBER
ethernet1/1/5:3 19 PORT_UP(CLI) LINK_DOWN 0MB
FD NO FIBER
ethernet1/1/5:4 20 PORT_UP(CLI) LINK_DOWN 0MB
FD NO FIBER
ethernet1/1/6 21 PORT_UP(CLI) LINK_DOWN 0MB
556
OpenFlow