Reference Guide

shconfig Local "show running-configuration"
showint Local "show interface $*"
shver Local "show version"
Number of config aliases : 3
Number of local aliases : 3
Supported
Releases
10.3.0E or later
show boot
Displays detailed information about the boot image.
Syntax
show boot [detail]
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
The Next-Boot field displays the partition that the next reload uses.
Example
OS10# show boot
Current system image information:
===================================
Type Boot Type Active Standby Next-Boot
--------------------------------------------------------------------
Node-id 1 Flash Boot [A] 10.2.9999E [B] 10.2.9999E [A] active
OS10# show boot detail
Current system image information detail:
==========================================
Type: Node-id 1
Boot Type: Flash Boot
Active Partition: A
Active SW Version: 10.2.9999E
Active SW Build Version: 10.2.9999E(3633)
Active Kernel Version: Linux 3.16.36
Active Build Date/Time: 2017-01-25T06:36:22Z
Standby Partition: B
Standby SW Version: 10.2.9999E
Standby SW Build Version: 10.2.9999E(3633)
Standby Build Date/Time: 2017-01-25T06:36:22Z
Next-Boot: active[A]
Supported
Releases
10.2.0E or later
show candidate-configuration
Displays the current candidate configuration file.
Syntax
show candidate-configuration [aaa | access-list | as-path | bgp | class-map
| community-list | compressed | control-plane | dot1x | extcommunity-list
| interface | lacp | line | lldp | logging | monitor | ospf | ospfv3 |
policy-map | prefix-list | qos-map | radius-server | route-map | sflow |
snmp | spanning-tree | support-assist | system-qos | trust-map | users |
vlt]
Parameters
● aaa — (Optional) Current candidate AAA configuration.
● access-list — (Optional) Current candidate access-list configuration.
62 Getting Started