Reference Guide

Usage
Information
None
Example
OS10# clear logging log-file
Proceed to clear the log file [confirm yes/no(default)]:
Supported
Releases
10.2.0E or later
logging console
Disables, enables, or configures the minimum severity level for logging to the console.
Syntax
logging console {disable | enable | severity}
To set the severity to the default level, use the no logging console severity command. The
default severity level is log-notice.
Parameters severity — Set the minimum logging severity level:
● log-emerg — Set to unusable.
● log-alert — Set to immediate action is needed.
● log-crit — Set to critical conditions.
● log-err — Set to error conditions.
● log-warning — Set to warning conditions.
● log-notice — Set to normal but significant conditions (default).
● log-info — Set to informational messages.
● log-debug — Set to debug messages.
Default Log-notice
Command Mode CONFIGURATION
Usage
Information
None
Example
OS10(config)# logging console disable
Example (Enable)
OS10(config)# logging console enable
Example
(Severity)
OS10(config)# logging console severity log-warning
Supported
Releases
10.2.0E or later
logging enable
Enables system logging.
Syntax
logging enable
To disable the logging capability, use the no logging enable command.
Parameters None
Default Enabled
Command Mode CONFIGURATION
Usage
Information
The no version of this command disables all logging.
Troubleshoot OS10 805