Reference Guide

Table Of Contents
Network Mask: /0
Metric Type: 1
TOS: 0
Metric: 0
Forward Address: 0.0.0.0
External Route Tag: 0
LS age: 65
Options: (No TOS-Capability, No DC, No Type 7/5 translation)
LS type: NSSA External
Link State ID: 12.1.1.0
Advertising Router: 2.2.2.2
LS Seq Number: 0x80000001
Checksum: 0xBDEA
Length: 36
Network Mask: /24
Metric Type: 2
TOS: 0
Metric: 20
Forward Address: 0.0.0.0
External Route Tag: 0
LS age: 65
Options: (No TOS-Capability, No DC, No Type 7/5 translation)
LS type: NSSA External
Link State ID: 13.1.1.0
Advertising Router: 2.2.2.2
LS Seq Number: 0x80000001
Checksum: 0xB0F6
Length: 36
Network Mask: /24
Metric Type: 2
TOS: 0
Metric: 20
Forward Address: 0.0.0.0
External Route Tag: 0
LS age: 65
Options: (No TOS-Capability, No DC, No Type 7/5 translation)
LS type: NSSA External
Link State ID: 14.1.1.0
Advertising Router: 2.2.2.2
LS Seq Number: 0x80000001
Checksum: 0xA303
Length: 36
Network Mask: /24
Metric Type: 2
TOS: 0
Metric: 20
Forward Address: 0.0.0.0
External Route Tag: 0
Supported Releases
10.2.0E or later
show ip ospf database opaque-area
Displays information about the opaque-area (Type 10) LSA.
Syntax
show ip ospf [process-id] database opaque-area
Parameters process-id — (Optional) Displays the opaque-area (Type 10) information for an OSPF Process ID. If you do not
enter a Process ID, this command applies only to the rst OSPF process.
Default Not congured
Command Mode EXEC
Layer 3 365