Reference Guide

Table Of Contents

Congure management VRF

You can add only the management interfaces to the management VRF instance.

Before you assign the management interface to the management VRF instance, remove all the congured settings, including the IP

address, on the management interface.

1 Enter the ip vrf management command in the CONFIGURATION mode.

2 Add the management interface by using the interface management command in the VRF CONFIGURATION mode.

Congure management VRF

OS10(config)# ip vrf management

OS10(conf-vrf)# interface management

You can enable various services in the either of the management or default VRF instances. Refer to the following table for the services

supported in the management VRF instance and the default VRF instance.

Application Management VRF Default VRF

DHCP client Yes Yes

DHCP relay No Yes

DHCP server No Yes

DNS client Yes Yes

FTP client Yes Yes

HTTP client Yes Yes

ICMP / Ping Yes Yes

NTP client Yes Yes

NTP server Yes Yes

OSPFV2 /OSPFV3/BGP No Yes

RADIUS server Yes Yes

SCP client Yes Yes

sFlow Yes No

SFTP Yes Yes

SNMP traps Yes Yes

SSH server` Yes Yes

Syslog Yes No

Telnet server Yes Yes

Layer 3 405