Connectivity Guide

After you congure the source IP address in a leaked VRF, if ping is initiated without -I option, then the source IP address will be that
of loopback interface.
VRF commands
interface management
Adds a management interface to the management VRF instance.
Syntax
interface management
Parameters None
Default Not congured
Command Mode VRF CONFIGURATION
Usage Information The no version of this command removes the management interface from the management VRF instance.
Example
OS10(config)# ip vrf management
OS10(conf-vrf)# interface management
Supported Releases 10.4.0E(R1) or later
ip domain-list vrf
Congures a domain list for the management VRF instance or any non-default VRF instance that you create.
Syntax
ip domain-list vrf {management | vrf-name} domain-names
Parameters
• management—Enter the keyword management to congure a domain list for the management VRF
instance.
• vrf-name—Enter the name of the non-default VRF instance to congure a domain list for that non-default
VRF instance.
•
domain-names—Enter the list of domain names.
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command removes the domain list conguration from the management or the non-default
VRF instance.
Example
OS10(config)# ip domain-list vrf management dns1 dell.com
or
OS10(config)# ip domain-list vrf blue dnsl dell.com
Supported Releases 10.4.0E(R1) or later
294 Layer 3