Connectivity Guide

"member-ports": [{
"name": "ethernet1/1/5",
"lacp-mode": "ACTIVE"
}]
}]
}
Parameters
• port-channelid-number — Enter port-channelid-number, where id-number is from 1 to 128.
• name string — Enter port-channelid-number.
• lag-mode bool — Enter DYNAMIC for a dynamically congured port channel; enter STATIC for a statically
congured port channel.
• ethernet-interface — Enter the physical Ethernet interface in the format ethernetnode/slot/
port.
• lacp-mode mode — Enter LACP actor mode. Valid values are active, on, and passive.
Example
curl -X PATCH -k -u admin:admin -H "accept: application/json"
-H "Content-Type: application/json"
"https://10.11.86.113/restconf/data/interfaces/interface/port-channel20"
-d '{"interface": [{"name":"port-channel20", "lag-mode":"DYNAMIC",
"member-ports":[{"name":"ethernet1/1/5", "lacp-mode":"ACTIVE"}]}]}'
Congure minimum links in port channel
RESTCONF
endpoint
/restconf/data/interfaces/interface/port-channel10
JSON content
{
"interface": [{
"name": "port-channel10",
"min-links": 5
}]
}
Parameters
• port-channelid-number — Enter port-channelid-number, where port-channel id-number
is from 1 to 128.
• name string — Enter port-channelid-number.
• min-links number — Enter the minimum number of port channel links that must be in an operational UP
status for the port channel to be operationally up.
Example
curl -X PATCH -k -u admin:admin -H "accept:application/json"
-H "Content-Type:application/json"
"https://10.11.86.113/restconf/data/interfaces/interface/port-channel10"
-d '{"interface": [{"name":"port-channel10", "min-links":5}]}'
Assign IP address to port channel
RESTCONF
endpoint
/restconf/data/interfaces/interface/port-channel10
JSON content
{
"interface": [{
"name": "port-channel10",
"dell-ip:ipv4": {
"address": {
"primary-addr": "1.1.1.1/24"
}
}
RESTCONF API 927