Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4148U-ON
1101110211031104110511061107110811091110
Table Of Contents
Parameters None
Default None
Command mode EXEC
Usage
information
This command is available only for the sysadmin and secadmin roles. This command generates the
SSL certificate and restarts the OVSDB server to start using the newly generated certificate.
Example
OS10# nve controller ssl-key-generate
Supported
releases
10.4.3.0 or later
show nve controller
Displays information about the controller and the controller-managed interfaces.
Syntax
show nve controller
Parameters None
Default None
Command mode EXEC
Example
OS10# show nve controller
Management IP : 10.16.140.29/16
Gateway IP : 55.55.5.5
Max Backoff : 1000
Configured Controller : 10.16.140.172:6640 ssl (connected)
Controller Cluster
IP Port Protocol Connected State Max-
Backoff
10.16.140.173 6640 ssl true ACTIVE 1000
10.16.140.171 6640 ssl false BACKOFF 1000
10.16.140.172 6640 ssl true ACTIVE 1000
NVE Controller Ports
ethernet1/1/1:1
ethernet1/1/15
Supported
releases
10.4.3.0 or later
show nve controller ssl-certificate
Displays the SSL certificate generated in the system.
Syntax
show nve controller ssl-certificate
Parameters None
Default None
Command mode EXEC
Usage
information
This command is available only for sysadmin and secadmin roles.
Example
OS10# show nve controller
-----BEGIN CERTIFICATE-----
MIIDgDCCAmgCAQMwDQYJKoZIhvcNAQENBQAwgYExCzAJBgNVBAYTAlVTMQswCQYD
VXLAN 1101