Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4148U-ON
1141114211431144114511461147114811491150
Table Of Contents
Parameters
● username — Enter the username to provide access to bootloader protection.
● password — Enter a password for the specified username.
Default Disabled
Command Mode EXEC
Usage
Information
You can enable bootloader protection by executing this command. You can configure a maximum of three
username / password pairs for bootloader protection.
Example
OS10# boot protect enable username root password calvin
Supported
Releases
10.4.3.0 or later
show boot protect
Displays the current list of configured users that have access to bootloader protection.
Syntax
show boot protect
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
Displays the current list of authorised users for bootloader protection, but hides their passwords for
security reasons.
Example
(Disabled)
OS10# show boot protect
Boot protection disabled
Example
(Enabled)
OS10# show boot protect
Boot protection enabled
Authorized users: root linuxadmin admin
Supported
Releases
10.4.3.0 or later
show secure-boot pki-certificates
Displays PKI certificates that are installed in the system.
Syntax
show secure-boot pki-certificates
Parameters None
Default None
Security and
Access
Sysadmin and secadmin
Command Mode EXEC
Usage
Information
None
Example
OS10# show secure-boot pki-certificates
Certificate Key Id : 123
Version Number : 3 (0x2)
Serial Number : 17154672033164819608 (0xee11a353271dfc98)
Signature Algorithm : sha256WithRSAEncryption
Issuer : C=IN, ST=Some-State, L=some-city, O=Internet
1144 Security