Users Guide

Example
OS10# clear ip access-list counters
Supported
Releases
10.2.0E or later
clear ipv6 access-list counters
Clears IPv6 access-list counters for a specific access-list.
Syntax
clear ipv6 access-list counters [access-list-name]
Parameters access-list-name — (Optional) Enter the name of the IPv6 access-list to clear counters. A maximum
of 140 characters.
Default Not configured
Command Mode EXEC
Usage
Information
If you do not enter an access-list name, all IPv6 access-list counters clear. The counter counts the
number of packets that match each permit or deny statement in an access list. To get a more recent
count of packets matching an access list, clear the counters to start at zero. To view access-list
information, use the show access-lists command.
Example
OS10# clear ipv6 access-list counters
Supported
Releases
10.2.0E or later
clear mac access-list counters
Clears counters for a specific or all MAC access lists.
Syntax
clear mac access-list counters [access-list-name]
Parameters access-list-name — (Optional) Enter the name of the MAC access list to clear counters. A
maximum of 140 characters.
Default Not configured
Command Mode EXEC
Usage
Information
If you do not enter an access-list name, all MAC access-list counters clear. The counter counts the
number of packets that match each permit or deny statement in an access list. To get a more recent
count of packets matching an access list, clear the counters to start at zero. To view access-list
information, use the show access-lists command.
Example
OS10# clear mac access-list counters
Supported
Releases
10.2.0E or later
deny
Configures a filter to drop packets with a specific IP address.
Syntax
deny [protocol-number | icmp | ip | tcp | udp] [A.B.C.D | A.B.C.D/x | any |
host ip-address] [A.B.C.D | A.B.C.D/x | any | host ip-address] [capture |
count | dscp value | fragment | log]
Parameters
● protocol-number — (Optional) Enter the protocol number identified in the IP header, from 0 to
255.
Access Control Lists 1255