Users Guide

Display FEFD information
To view FEFD information:
● To view FEFD information globally, use the show fefd command in EXEC mode.
● To view FEFD information for an interface, use the show fefd interface command in EXEC mode.
The following is a sample output of FEFD global information:
OS10# show fefd
FEFD is globally 'ON', interval is 15 seconds, mode is Normal.
INTERFACE MODE INTERVAL STATE
============================================================
eth1/1/1 NA NA Idle (Not running)
eth1/1/2 NA NA Idle (Not running)
eth1/1/3 NA NA Idle (Not running)
eth1/1/4 NA NA Idle (Not running)
eth1/1/5 NA NA Idle (Not running)
eth1/1/6 NA NA Idle (Not running)
eth1/1/7 NA NA Idle (Not running)
The following is a sample output of FEFD information for an interface:
rt-maa-s4248FBL-3# show fefd ethernet 1/1/1
FEFD is globally 'ON', interval is 15 seconds, mode is Normal.
INTERFACE MODE INTERVAL STATE
============================================================
eth1/1/1 NA NA Idle (Not running)
FEFD Commands
debug fefd
Enables debugging of FEFD.
Syntax
debug fefd {all | events | packets} [interface]
Parameters
● all—Enter the keyword to view all FEFD debug information.
● events—Enter the keyword to view debug information about FEFD state changes.
● packets—Enter the keyword to view debug information about FEFD packets that are sent and
received.
● (Optional) interface—Enter interface information.
Default Not configured
Command Mode EXEC Privilege
Example
OS10# debug fefd
Supported
Releases
10.4.3.0 or later
fefd
Configures FEFD on an interface.
Syntax
fefd [mode {normal | aggressive} | interval seconds | disable]
Parameters
● (Optional) mode—Enter the keyword and enter either normal to enable the normal mode or
aggressive to enable the aggressive mode.
Layer 2 451