Users Guide

Table Of Contents
show ip ospf database opaque-area
Displays information about the opaque-area Type 10 LSA.
Syntax
show ip ospf [process-id] [vrf vrf-name] database opaque-area
Parameters
process-id (Optional) Displays the opaque-area Type 10 information for an OSPF process ID. If
you do not enter a process ID, this command applies only to the first OSPF process.
vrf vrf-name (Optional) Displays the opaque-area Type 10 information for an OSPF process ID
corresponding to a VRF.
Default Not configured
Command Mode EXEC
Usage
Information
LS Age Displays the LS age.
Options Displays the optional capabilities available on the router.
LS Type Displays the LS type.
Link State ID Identifies the router ID.
Advertising Router Identifies the advertising routers ID.
LS Seq Number Identifies the LS sequence number. This identifies old or duplicate LSAs.
Checksum Displays the Fletcher checksum of an LSAs complete contents.
Length Displays the LSA length in bytes.
Opaque Type Identifies the Opaque type field, the first 8 bits of the LS ID.
Opaque ID Identifies the Opaque type-specific ID, the remaining 24 bits of the LS ID.
Example
OS10# show ip ospf database opague-area
OSPF Router with ID (1.1.1.1) (Process ID 100)
Type-10 Area Local Opaque (Area 0.0.0.1)
LS age: 3600
Options: (No TOS-Capability, No DC)
LS type: Type-10 Area Local Opaque
Link State ID: 8.1.1.2
Advertising Router: 2.2.2.2
LS Seq Number: 0x80000008
Checksum: 0x83B8
Length: 28
Opaque Type: 8
Opaque ID: 65794
!!
!
Supported
Releases
10.2.0E or later
show ip ospf database opaque-as
Displays information about the opaque-as Type 11 LSAs.
Syntax
show ip ospf [process-id] opaqueas
Parameters process-id (Optional) Displays opaque-as Type 11 LSA information for a specified OSPF process ID.
If you do not enter a process ID, this command applies only to the first OSPF process.
Default Not configured
Command Mode EXEC
Usage
Information
LS Age Displays the LS age.
Options Displays the optional capabilities available on the router.
LS Type Displays the LS type.
Link State ID Identifies the router ID.
Layer 3 765