API Guide

● mgmt — Enter the Management interface.
Defaults Not configured
Command Mode CONFIGURATION
Usage
Information
None
Example
OS10(conf-track-100)# interface ethernet line-protocol
Supported
Releases
10.3.0E or later
ip reachability
Configures an object to track a specific next-hop host's reachability.
Syntax
ip host-ip-address reachability
Parameters host-ip-address — Enter the IPv4 host address.
Defaults Not configured
Command Mode CONFIGURATION
Usage
Information
None
Example
OS10(config)# track 100
OS10(conf-track-100)# ip 10.10.10.1 reachability
Supported
Releases
10.3.0E or later
ipv6 reachability
Configures an object to track a specific next-hop host's reachability.
Syntax
ipv6 host-ip-address reachability
Parameters host-ip-address — Enter the IPv6 host address.
Defaults Not configured
Command Mode CONFIGURATION
Usage
Information
None
Example
OS10(config)# track 200
OS10(conf-track-200)# ipv6 10::1 reachability
Supported
Releases
10.3.0E or later
reachability-refresh
Configures a polling interval for reachability tracking.
Syntax
reachability-refresh interval
Parameters interval — Enter the polling interval value. A maximum of 3600 seconds.
Layer 3 749