Users Guide
switch-port-profile
Configures a port profile on the switch. The port profile determines the available front-panel ports and breakout modes.
Syntax
switch-port-profile node/unit profile
Parameters
● node/unit — Enter switch information. For a standalone switch, enter 1/1.
● profile — Enter the name of a platform-specific profile.
Default
profile-1
Command Mode CONFIGURATION
Usage
Information
● S4148-ON Series port profiles:
○ profile-1 — SFP+ 10G ports (1-24 and 31-54) and QSFP28 100G ports (25-26 and 29-30) are
enabled.
QSFP28 ports support 100GE and 4x10G, 4x25G, and 2x50G breakouts.
○ profile-2 — SFP+ 10G ports (1-24 and 31-50), QSFP+ 40G ports (27-28), and QSFP28 ports
in 40G mode (25-26 and 29-30) are enabled.
QSFP+ and QSFP28 ports support 40GE and 4x10G breakouts.
○ profile-3 — SFP+ 10G ports (5-24 and 31-50), QSFP+ 40G ports (27-28), and QSFP28 ports
with 40G and 100G capability (25-26 and 29-30) are enabled.
QSFP+ ports support 40GE and 4x10G breakouts. QSFP28 ports support 100GE and 4x25G
breakouts with QSFP28 transceivers, and 40GE and 4x10G breakouts with QSFP+ transceivers.
○ profile-4 — SFP+ 10G ports (5-24 and 31-50), QSFP+ 40G ports (27-28), and QSFP28 ports
with 40G and 100G capability (25-26 and 29-30) are enabled.
QSFP+ ports support 40GE and 4x10G breakouts. QSFP28 ports support 100GE and 2x50G
breakouts with QSFP28 transceivers, and 40GE and 4x10G breakouts with QSFP+ transceivers.
○ profile-5 — SFP+ 10G ports (1-24 and 31-54), QSFP+ 40G ports (27-28), QSFP28 ports with
40G capability (26 and 30), and QSFP28 ports with 40G and 100G capability (25 and 29) are
enabled.
QSFP+ ports support 40GE and 4x10G breakouts. QSFP28 ports 26 and 30 support 40GE and
4x10G breakouts with QSFP+ transceivers. QSFP28 ports 25 and 29 support 100GE and 4x25G
breakouts with QSFP28 transceivers, and 40GE and 4x10G breakouts with QSFP+ transceivers.
○ profile-6 — SFP+ 10G ports (1-24 and 31-54), QSFP+ 40G ports (27-28), QSFP28 ports with
40G capability (26 and 30), and QSFP28 ports with 40G and 100G capability (25 and 29) are
enabled.
QSFP+ ports support 40GE and 4x10G breakouts. QSFP28 ports 26 and 30 support 40GE and
4x10G breakouts with QSFP+ transceivers. QSFP28 ports 25 and 29 support 100GE and 2x50G
breakouts with QSFP28 transceivers, and 40GE and 4x10G breakouts with QSFP+ transceivers.
● S4148U-ON Port profiles:
○ profile-1 — SFP+ unified ports (1-24), QSFP28 unified ports (25-26 and 29-30), QSFP+
Ethernet ports (27-28), and SFP+ Ethernet ports (31-54) are enabled.
■ SFP+ unified port groups operate in FC mode with 2x16GFC breakouts (ports 1 and 3) by
default and support 4x8GFC. SFP+ unified ports support Ethernet 10GE mode.
■ QSFP28 unified ports 25 and 29 operate in Ethernet 100GE mode by default, and support 40GE
with QSFP+ transceivers and 4x10G breakouts. QSFP28 ports 25 and 29 support 1x32GFC,
2x16GFC, and 4x8GFC in FC mode.
■ QSFP28 unified ports 26 and 30 operate in Ethernet 40GE mode by default and support 4x10G
breakouts. QSFP28 ports 26 and 30 support 1x32GFC, 2x16GFC, and 4x8GFC in FC mode.
■ QSFP+ Ethernet ports operate at 40GE by default and support 4x10G breakouts.
■ SFP+ Ethernet ports operate at 10GE.
○ profile-2 — SFP+ unified ports (1-24), QSFP28 unified ports (25-26 and 29-30), QSFP+
Ethernet ports (27-28), and SFP+ Ethernet ports (31-54) are enabled.
■ SFP+ unified ports operate in Ethernet 10GE mode by default. SFP+ unified port groups
support 4x8GFC and 2x16GFC breakouts (ports 1 and 3) in FC mode.
416
Interfaces