Users Guide

show license status
Displays license status information.
Syntax
show license status
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
Use the show license status command to verify the current license for running OS10, its duration,
and the service tag assigned to the switch.
Example
OS10# show license status
System Information
---------------------------------------------------------
Vendor Name : DELL EMC
Product Name : S4148F-ON
Hardware Version : X01
Platform Name : x86_64-dell_s4100_c2338-r0
PPID : TW09H9MN282987130026
Service Tag : 9531XC2
Product Base :
Product Serial Number:
Product Part Number :
License Details
----------------
Software : OS10-Enterprise
Version : 10.5.1.0
License Type : PERPETUAL
License Duration: Unlimited
License Status : Active
License location: /mnt/license/9531XC2.lic
--------------------------------------------------------
Supported
Releases
10.3.0E or later
show running-configuration
Displays the configuration currently running on the device.
Syntax
show running-configuration [aaa | access-list | as-path | bfd | bgp [vrf
vrf-name] [neighbor {ip-address | interface interface-type | class-map |
community-list | compressed | control-plane | crypto | dot1x |
extcommunity-list | evpn | fefd | igmp | interface [virtual-network vn-id]
| ip dhcp snooping | lacp | line | lldp | logging | management-route | mld
| monitor | ntp | nve | ospf | ospfv3 | password-attributes | pim | policy-
map | port-security | prefix-list | privilege | qos-map | radius-server |
route | route-map | sflow | smartfabric | snmp | spanning-tree | support-
assist | system-qos | tacacs-server | telemetry | trust-map | uplink-state-
group | userrole | users | virtual-network | vlt | vrf | wred-profile]
Parameters
● aaa — (Optional) Current operating AAA configuration.
● access-list — (Optional) Current operating access-list configuration.
● as-path — (Optional) Current operating as-path configuration.
● bfd — (Optional) Current operating BFD configuration.
● bgp] — (Optional) Current operating BGP configuration.
○ [vrf vrf-name] — Enter the VRF name.
○ [neighbor [ip-address | interface interface-type Enter the interface IP address or interface name.
● class-map — (Optional) Current operating class-map configuration.
● community-list — (Optional) Current operating community-list configuration.
CLI Basics 93