Connectivity Guide

interface
port-channel
number
Display the number of MAC addresses learned on the specied port channel.
vn-id
Display the number of MAC addresses learned on the specied virtual network (1-65535).
Default Not congured
Command mode EXEC
Usage information Use the show mac address-table count virtual-network command to display the number of MAC
address entries learned on virtual networks in the MAC address table.
Example
OS10# show mac address-table count virtual-network
MAC Entries for all vlans :
Dynamic Address Count : 8
Static Address (User-defined) Count : 0
Total MAC Addresses in Use: 8
Supported releases 10.4.2.0 or later
show mac address-table extended
Displays MAC addresses learned on all VLANs and VXLANs.
Syntax
show mac address-table extended [address mac-address | interface {ethernet
node/slot/port:subport | port-channel number} | static | dynamic]
Parameters
address mac-
address
Display only information about the specied MAC address.
interface
ethernet node/
slot/
port[:subport]
Display only MAC addresses learned on the specied interface.
interface
port-channel
number
Display only MAC addresses learned on the specied port channel.
static
Display only static MAC addresses.
dynamic
Display only dynamic MAC addresses.
Default Not congured
Command mode EXEC
Usage information By default, MAC learning from a remote VTEP is enabled. Use the show mac address-table extended
command to verify the MAC addresses learned both on VXLAN virtual networks and VLANs on the switch. The
show mac address-table command displays the MAC addresses learned only on LAN port and VLAN
interfaces.
Example
OS10# show mac address-table extended
Virtual-Network VlanId MAC Address Type Interface/Remote-VTEP
----------------------------------------------------------------------------
- 500 00:00:00:00:11:11 dynamic ethernet1/1/31:1
- 500 00:00:00:00:44:44 dynamic port-channel1000
- 1 aa:bb:cc:dd:f0:03 static port-channel1000
- 500 aa:bb:cc:dd:f0:03 static port-channel1000
VXLAN 535