Specifications

Power Supply 1 Input Current(IIN) : 0.610000 A
Power Supply 1 Output Current(IOUT) : 9.150000 A
Power Supply 1 Input Power(PIN) : 124.000000 W
Power Supply 1 Output Power(POUT) : 111.700000 W
Power Supply 1 Temperature : 30.000000 C
Power Supply 1 Fan Present
Power Supply 1 Fan Status is Normal
Power Supply 1 Fan Airflow Type is F2B
Power Supply 1 Fan Speed(RPM) : 9072
Getting details of Power Supply 2 using LPC interface
Power Supply 2 is Present
Power Supply 2 Input Type AC
Power Supply 2 Output Voltage Low
Power Supply 2 Input Voltage(VIN) : 0.000000 V
Power Supply 2 Output Voltage(VOUT) : 0.000000 V
Power Supply 2 Input Current(IIN) : 0.000000 A
Power Supply 2 Output Current(IOUT) : 0.000000 A
Power Supply 2 Input Power(PIN) : 0.000000 W
Power Supply 2 Output Power(POUT) : 0.000000 W
Power Supply 2 Temperature : 6553.100098 C
Power Supply 2 Fan Present
Power Supply 2 Fan Status is Normal
Power Supply 2 Fan Airflow Type is F2B
Power Supply 2 Fan Speed(RPM) : 9120
Power Supply Test ......................................... Passed
root@dell-diag-os:~#
Conguration le format
This output example is for systems without a SMF chip.
=====
Power Supply 1 | Dell | i2c | 1 | 0x32 | 0x03 | 7 | 0 | 0x03 | 6 | 0 | /dev/i2c-1 0x70:0:0xff:
0x1 | i2c |
1 | 0x51 | 0x59 | /dev/i2c-1 0x70:0:0xff:0x10 | - | 1 | 0x40 | 0x4 | - | 6 | 0 | 1
Power Supply 2 | Dell | i2c | 1 | 0x32 | 0x03 | 3 | 0 | 0x03 | 2 | 0 | /dev/i2c-1 0x70:0:0xff:
0x1 | i2c |
1 | 0x50 | 0x58 | /dev/i2c-1 0x70:0:0xff:0x10 | - | 1 | 0x40 | 0x4 | - | 6 | 0 | 1
The conguration le for the psutool has a single supply on each line:
# Name | presence method | access method | bus | address | register | bits | pree
s | good reg | bits | good
=====
=====
#R | offset | size(in Bytes) | Name
#B | bit mask | name
LPC-INTERFACE
D |Power Supply 1
R | 0x234 | 2 |PSU_MAX_POWER
R | 0x236 | 1 |PSU_FUNCTION_SUPPORT
B | 0x04 |TEMP_SUPPORT
B | 0x02 |FAN_SUPPORT
B | 0x01 |VOLT_CURR_PWR_SUPPORT
R | 0x237 | 1 |PSU_STATUS
B | 0x10 |PSU_TYPE_MIS_MATCH
B | 0x08 |PSU_VOUT_LOW
B | 0x04 |PSU_VOUT_HIGH
B | 0x02 |PSU_TYPE
B | 0x01 |PSU_PRESENT_STATUS
R | 0x239 | 2 |PSU_TEMPERATURE
R | 0x23B | 2 |PSU_FAN_SPEED
R | 0x23D | 1 |PSU_FAN_STATUS
B | 0x04 |PSU_FAN_PRESENT_STATUS
• PSU Name —The name of the supply to display. The entries do not have to be in any named order.
Dell EMC DiagOS tools
73