Specifications

Temperature Sensor 8 temperature value is 31.0 C
Temperature Sensor 9 temperature value is 42.0 C
root@dell-diag-os:/opt/dell/diag/bin#
Conguration le format
This output example is for systems without a SMF chip.
TEMPLATE:Name of sensor|sensor type|dev bus path|dev adrs|diode|mux|low|warn|critical|COMMENTS
LM75 sensor |LM75|/dev/i2c-1|0x4d|0|/dev/i2c-1 0x70:0x00:0xff:0x1|-5|45|50| <<==
LM75 sensor |LM75|/dev/i2c-1|0x49|0|/dev/i2c-1 0x70:0x00:0xff:0x2|-5|45|50| <<==
LM75 sensor |LM75|/dev/i2c-1|0x4a|0|/dev/i2c-1 0x70:0x00:0xff:0x2|-5|45|50| <<==
LM75 sensor |LM75|/dev/i2c-1|0x4b|0|/dev/i2c-1 0x70:0x00:0xff:0x2|-5|45|50| <<==
LM75 sensor |LM75|/dev/i2c-1|0x4c|0|/dev/i2c-1 0x70:0x00:0xff:0x2|-5|45|50| <<==
LM75 sensor |LM75|/dev/i2c-1|0x4e|0|/dev/i2c-1 0x70:0x00:0xff:0x2|-5|45|50| <<==
LM75 sensor |LM75|/dev/i2c-1|0x4f|0|/dev/i2c-1 0x70:0x00:0xff:0x2|-5|45|50| <<==
The temperature sensor conguration le displays each sensor on its own line.
• Sensor Name — The name that describes the purpose of the sensor.
• Sensor Driver Type — The type of chip used for the sensor. LM75, MAX6699, and EMC1428 are supported.
TEMPLATE:Name of sensor|sensor type|dev bus path|dev adrs|diode|mux|low|warn|crii
tical|COMMENTS
=====
#TEMPLATE:Name of sensor|sensortype|access_type|temp_reg_offset|temp_unit|sensorr
_status_offset
LPC-INTERFACE
Temperature Sensor 1 |LM75|lpc|0x14|0.1|0xdc
Temperature Sensor 2 |LM75|lpc|0x16|0.1|0xdd
Temperature Sensor 3 |LM75|lpc|0x18|0.1|0xde
Temperature Sensor 4 |LM75|lpc|0x1a|0.1|0xdf
Temperature Sensor 5 |LM75|lpc|0x1c|0.1|0xe0
Temperature Sensor 6 |LM75|lpc|0x1e|0.1|0xe1
Temperature Sensor 7 |LM75|lpc|0x20|0.1|0xe2
Temperature Sensor 8 |LM75|lpc|0x22|0.1|0xe3
Temperature Sensor 9 |LM75|lpc|0x24|0.1|0xe4
=====
/dev/i2c-1 0x70:0:0xff:0x9:,:0x74:1:0xff:0xa
1500000
vmetool
The CPLDupgradetool uses vmetool to upgrade CPLD.
NOTE
: Do not call the vmetool directly; use the cpldupgradetool to call the vmetool.
CLI options
root@dell-diag-os:/opt/dell/diag/bin# vmetool
Lattice Semiconductor Corp.
ispVME(tm) V12.2 Copyright 1998-2011.
For daisy chain programming of all in-system programmable devices
Usage: vme [option] vme_file [vme_file]
Example: vme vme_file1.vme vme_file2.vme
Example: vme -c | -cl | -ch
Example: where sel_pin will be LOW for -cl option and HIGH for -ch
Example: vme -c | -cl | -ch vme_file1.vme vme_file2.vme
root@dell-diag-os:/opt/dell/diag/bin#
88
Dell EMC DiagOS tools