Reference Guide

Neighbor AS MsgRcvd MsgSent Up/Down State/Pfx
80.1.1.2 800 8 4 00:01:10 5
Supported
Releases
10.3.0E or later
show ip bgp ipv6 unicast
Displays route information for BGP IPv6 routes.
Syntax
show ip bgp [vrf vrf-name] ipv6 unicast [neighbors] {ip-address/mask |
summary} | multicast {ip-address/mask | neighbors} [denied-routes]
Parameters
● vrf vrf-name — (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to view
IPv6 unicast information corresponding to that VRF.
● neighbors — Displays IPv6 neighbor information.
● ip-address/mask — Displays information about IPv6 unicast routes.
● summary — Displays IPv6 unicast summary information.
● multicast ip-address/mask — Displays IPv6 multicast routes information.
● denied-routes — (Optional) Displays the configured IPv6 denied routes.
Default Not configured
Command Mode EXEC
Usage
Information
This command displays IPv6 BGP routing information.
Example
OS10# show ip bgp ipv6 unicast summary
BGP router identifier 80.1.1.1 local AS number 102
Neighbor AS MsgRcvd MsgSent Up/Down State/Pfx
80.1.1.2 800 8 4 00:01:10 5
Supported
Releases
10.3.0E or later
show ip bgp neighbors
Displays information that BGP neighbors exchange.
Syntax
show ip bgp [vrf vrf-name] neighbors ip-address [denied-routes]
Parameters
● vrf vrf-name — (OPTIONAL) Enter the keyword vrf and then the name of the VRF to view
information exchanged between BGP neighbors corresponding to that VRF.
● ip-address — Enter the IP address for a specific neighbor.
● denied-routes — (Optional) Displays the list of routes denied by policy.
● advertised-routes—Displays the routes advertised to neighbor
● dampened-routes—Displays the suppressed routes received from neighbor
● flap-statistics—Displays the route's flap statistics received from neighbor
● received-routes—Displays the routes received from neighbor
● routes—Displays routes learned from neighbor
Default Not configured
Command Mode EXEC
Usage
Information
● BGP neighbor — Displays the BGP neighbor address and its AS number. The last phrase in the line
indicates whether the link between the BGP router and its neighbor is an external or internal one. If
they are located in the same AS, the link is internal; otherwise the link is external.
● BGP version — Displays the BGP version (always version 4) and the remote router ID.
330 Layer 3