Reference Guide

clear ipv6 ospf statistics
Clears OSPFv3 traffic statistics.
Syntax
clear ipv6 ospf [instance-number] statistics
Parameters instance-number — (Optional) Enter an OSPFv3 instance number (1 to 65535).
Default Not configured
Command Mode EXEC
Usage
Information
This command clears the OSPFv3 traffic statistics in a specified instance or in all the configured OSPFv3
instances, and resets them to zero.
Example
OS10# clear ipv6 ospf 100 statistics
Supported
Releases
10.4.0E(R1) or later
default-information originate
Generates and distributes a default external route information to the OSPFv3 routing domain.
Syntax
default-information originate [always]
Parameters always — (Optional) Always advertise the default route.
Defaults Disabled
Command Mode ROUTER-OSPFv3
Usage
Information
The no version of this command disables the distribution of default route.
Example
OS10(config)# router ospfv3 100
OS10(config-router-ospfv3-100)# default-information originate always
Supported
Releases
10.3.0E or later
ipv6 ospf area
Attaches an interface to an OSPF area.
Syntax
ipv6 ospf process-id area area-id
Parameters
● process-id—Enter an OSPFv3 process ID for a specific OSPFv3 process (1 to 65535).
● area-id—Enter the OSPFv3 area ID in dotted decimal format (A.B.C.D) or enter an area ID number
(1 to 65535).
Default Not configured
Command Mode INTERFACE
Usage
Information
The no version of this command removes an interface from an OSPFv3 area.
Example
OS10(config)# interface vlan 10
OS10(conf-if-vl-10)# ipv6 ospf 10 area 1
Supported
Releases
10.3.0E or later
Layer 3 425