Reference Guide

OS9 environment commands
You can configure commands in an OS9 environment by using the feature config-os9-style command. The current
release supports VLAN tagging and port-channel grouping commands.
● VLAN Interface mode
○ tagged
○ no tagged
○ untagged
○ no untagged
● Port-channel Interface mode:
○ channel-member
○ no channel-member
● Enable the feature to configure commands in an OS9 environment in CONFIGURATION mode.
OS10(config)# feature config-os9-style
OS10(config)# exit
OS10# show running-configuration compressed
interface breakout 1/1/28 map 10g-4x
feature config-os9-style
● Once this feature is enabled, you can use the OS9 format of commands only in the new session. This configuration does not
take effect in the current session.
OS10(config)# interface vlan 11
OS10(conf-if-vl-11)# tagged ethernet 1/1/15
OS10(conf-if-vl-11)# show configuration
!
interface vlan11
no shutdown
tagged ethernet 1/1/15
Common commands
alias
Creates a command alias.
Syntax
alias alias-name alias-value
Parameters
● alias-name — Enter the name of the alias (up to 20 characters).
● alias-value — Enter the command to be executed within double quotes. Enter the $ followed by either
numbers ranging from 1 to 9 or with an asterisk (*) and enter the parameters while executing the commands
using the alias. Use asterisk (*) to represent any number of parameters.
Default Not configured
Command Mode
EXEC
CONFIGURATION
Usage
Information
Use this command to create a shortcut to long commands along with arguments. Use the numbers 1 to 9 along with
the $ to provide input parameters.
The no version of this command deletes an alias.
50 Getting Started