Users Guide

● sticky — Displays secure sticky MAC address table entries.
● address — Displays a specific MAC address table entry.
● vlan vlan-id — Displays all entries based on the VLAN number from the address table, from 1 to
4093.
● interface — Displays the interface type:
○ ethernet node/slot/port[:subport] — Displays the Ethernet interface configuration
from the address table.
○ port-channel channel-number — Displays the port-channel interface configuration from
the address table, from 1 to 128.
Default
None
Command Mode EXEC
Usage
Information
The system maintains secure static and sticky MAC address entries saved in the startup configuration file
and deletes secure dynamic entries upon reboot.
Example
(Address)
OS10# show MAC address-table secure sticky
VlanId MAC Address Type Interface
1 4c:76:25:e5:4f:51 sticky
ethernet1/1/5
1 4c:76:25:e5:4f:55 sticky
ethernet1/1/6
1 4c:76:25:e5:4f:59 sticky
ethernet1/1/7
Supported
Releases
10.5.1.0 or later
show errdisable
Displays information on errdisable configurations and port recovery status.
Syntax
show errdisable [detect | recovery]
Parameters
● detect—Displays whether error disable detection is enabled.
● recovery—Displays details of recovery cause, recovery interval, and recovery status of the error
disabled port.
Default None
Command Mode EXEC
Usage
Information
The Errdisable Cause column displays one or more reasons for the error-disabled state of an
interface. If an interface is put in to error disabled state for multiple reasons, the interface does not
come up unless you enable automatic recovery for all reasons.
Example
OS10# show errdisable detect
Error-Disable Cause Detect Status
-----------------------------------------------
bpduguard Enabled
OS10# show errdisable recovery
Error-Disable Recovery Timer Interval : 300 seconds
Error-Disable Reason Recovery Status
----------------------------------------
bpduguard Enabled
MLL violation Enabled
1200 Security