Users Guide

significant amount of disk space. Dell EMC Networking recommends that you remove unnecessary image
files from the image directory by using the delete command; for example:
delete image://OS10EE-10.2.0.bin
Use the show image status command to view the download progress.
When using the scp and sftp options, always enter an absolute file path instead of a path relative to the
home directory of the user account; for example:
image download sftp://dellos10:password@10.1.1.1/home/dellos10/images/
PKGS_OS10EE-10.4.3.bin
Example
OS10# image download sftp://dellos10:adminTo%40%20@10.1.1.1/home/
dellos10/images/PKGS_OS10-Enterprise-10.4.0E.55-installer-x86_64.bin
Supported
Releases
10.2.0E or later
image install
Installs a new image or firmware file from a previously downloaded file or from a remote location.
Syntax
image install file-url
Parameters
● file-url—Location of the image or firmware file:
○ ftp://userid:passwd@hostip/filepath—Enter the path to install from a remote FTP
server.
○ http://hostip/filepath—Enter the path to install from the remote HTTP server.
○ scp://userid:passwd@hostip/filepath—Enter the path to install from a remote SCP file
system.
○ sftp://userid:passwd@hostip/filepath—Enter the path to install from a remote SFTP
file system.
○ tftp://hostip/filepath—Enter the path to install from a remote TFTP file system.
○ image://filename—Enter the path to use to install the image from a local file system.
○
usb://filepath—Enter the path to use to install the image from the USB file system.
Default All
Command Mode EXEC
Usage
Information
Use the show image status command to view the installation progress.
Example
OS10# image install ftp://10.206.28.174:/PKGS_OS10-Enterprise-10.4.0E.55-
installer-x86_64.bin
Supported
Releases
10.2.0E or later
show boot
Displays boot-related information.
Syntax
show boot [detail]
Parameters detail — (Optional) Enter to display detailed information.
Default Not configured
Command Mode EXEC
Getting Started with Dell EMC SmartFabric OS10 37