Users Guide

Gateway of last resort is not set
Destination Gateway Dist/Metric Last Change
---------------------------------------------------------------------------------
C 1000:100:10:1::/64 via 1000:100:10:1::4 virtual-network60000 0/0 00:37:08
C 1000:100:10:21::/64 via 1000:100:10:21::4 virtual-network60032 0/0 00:37:07
C 1000:100:10:41::/64 via 1000:100:10:41::4 virtual-network60064 0/0 00:37:06
C 1000:100:10:61::/64 via 1000:100:10:61::4 virtual-network60096 0/0 00:37:05
VXLAN MAC addresses
Use the show mac address-table virtual-network or show mac address-table extended commands to
display the MAC addresses learned on a VXLAN virtual network or learned on both VXLAN virtual networks and legacy VLANs.
Use the clear mac address-table dynamic virtual-network and clear mac address-table dynamic nve
remote-vtep commands to delete address entries from the MAC address virtual-network table.
NOTE: The existing show mac address-table and clear mac-address table commands do not display and
clear MAC addresses in a virtual-network bridge domain even when access ports in a switch-scoped VLAN are assigned to a
VXLAN virtual network.
Display VXLAN MAC addresses
Table 95. Display VXLAN MAC addresses (continued)
Command Description
show mac address-table virtual-network [vn-id
| local | remote | static | dynamic | address
mac-address | interface {ethernet node/slot/
port:subport | port-channel number}]
Displays all MAC addresses learned on all or a specified
virtual network.
vn-id: Displays only information about the specified
virtual network.
local: Displays only locally-learned MAC addresses.
remote: Displays only remote MAC addresses.
static: Displays only static MAC addresses.
dynamic: Displays only dynamic MAC addresses.
address mac-address: Displays only information
about the specified MAC address.
interface ethernet node/slot/port:subport:
Displays only MAC addresses learned on the specified
interface.
interface port-channel number: Displays only
MAC addresses learned on the specified port channel.
show mac address-table extended [address
mac-address | interface {ethernet node/slot/
port:subport | port-channel number} | static |
dynamic]
Displays MAC addresses learned on all VLANs and
VXLANs (default).
address mac-address: Displays only information
about the specified MAC address.
interface ethernet node/slot/port:subport:
Displays only MAC addresses learned on the specified
interface.
interface port-channel number: Displays only
MAC addresses learned on the specified port channel.
static: Displays only static MAC addresses.
dynamic: Displays only dynamic MAC addresses.
show mac address-table nve {vxlan-vni vn-id |
remote-vtep ip-address}
vxlan-vni vn-id: Displays MAC addresses learned on
NVE from the specified VXLAN virtual-network ID.
1126 VXLAN