Users Guide

UFT modes
A switch in a Layer 2 (L2) network may require a larger MAC address table size, while a switch in a Layer 3 (L3) network may
require a larger routing table size. Unified forwarding table (UFT) offers the flexibility to configure internal L2/L3 forwarding
table sizes.
OS10 supports several UFT modes for the forwarding tables. By default, OS10 selects a UFT mode that provides a reasonable
size for all tables. The supported UFT modes are: default, scaled-l2–switch, scaled-l3–hosts, and scaled-l3–routes.
NOTE: This feature is not supported on the Z9332F-ON platform.
Table 98. UFT Modes — Table Size for S4048–ON, S4048T-ON, S6010–ON
UFT Mode L2 MAC Table Size L3 Host Table Size L3 Routes Table Size
Scaled-l2–switch 294912 16384 16384
Scaled-l3–hosts 98304 212992 98304
Scaled-l3–routes 32768 16384 131072
Default 163840 147456 16384
Table 99. UFT Modes — Table Size for S3048–ON
UFT Mode L2 MAC Table Size L3 Host Table Size L3 Routes Table Size
Scaled-l2–switch 40960 2048 8192
Scaled-l3–hosts 8192 18432 8192
Default 28672 8192 8192
Table 100. UFT Modes — Table Size for S41XX-ON series
UFT Mode L2 MAC Table Size L3 Host Table Size L3 Routes Table Size
Scaled-l2–switch 278528 4096 16384
Scaled-l3–hosts 16384 266240 16384
Scaled-l3–routes 16384 4096 262144
Default 81920 69632 131072
Table 101. UFT Modes — Table Size for Z9100-ON
UFT Mode L2 MAC Table Size L3 Host Table Size L3 Routes Table Size
Scaled-l2–switch 139264 8192 16384
Scaled-l3–hosts 8192 139264 16384
Scaled-l3–routes 8192 8192 131072
Default 73728 73728 16384
Table 102. UFT Modes — Table Size for Z9264F-ON
17
1296 UFT modes