Users Guide

Mac-move-violation :shutdown-offending
Aging :Disabled
Total MAC Addresses :11
Secure static MAC Addresses :0
Sticky MAC Addresses :11
Secure Dynamic MAC addresses :0
View the error disabled state of interfaces
The Errdisable Cause column displays one or more reasons for the error-disabled state of an interface. If an interface is
put in to the Error Disabled state for multiple reasons, the interface does not come up unless you enable automatic recovery for
all the reasons.
OS10# show errdisable recovery
Error-Disable Recovery Timer Interval : 300 seconds
Error-Disable Reason Recovery Status
----------------------------------------
bpduguard Enabled
MLL violation Enabled
MAC-move-violation Enabled
Recovery Time Left
Interface Errdisable Cause (seconds)
-----------------------------------------------------------------------
ethernet1/1/1:1 bpduguard 30
ethernet1/1/1:2 bpduguard 1
ethernet1/1/10 bpduguard/mac-learn limit/mac-move 10
port-channel100 Mac-learn limit 50
port-channel128 mac-move 49
Related Videos
Port security on SmartFabric OS10
Port security commands
clear mac address-table secure
Clears sticky and dynamic secure MAC address entries from the MAC address table.
Syntax
clear mac address-table secure {{dynamic | sticky} {address mac_addr |
vlan vlan-id | interface {ethernet node/slot/port[:subport] | port-channel
channel-number}} | all}
Parameters
● dynamic — Displays secure dynamic MAC address table entries.
● sticky — Displays secure sticky MAC address table entries.
● all — Deletes all secure sticky and dynamic MAC address table entries.
● address mac_addr — (Optional) Deletes a configured secure MAC address from the address table
in nn:nn:nn:nn:nn:nn format.
● vlan vlan-id — (Optional) Delete all entries based on the VLAN number from the address table,
from 1 to 4093.
● interface — (Optional) Clear the interface type:
○ ethernet node/slot/port[:subport] — Delete the Ethernet interface configuration from
the address table.
○
port-channel channel-number — Delete the port-channel interface configuration from the
address table, from 1 to 128.
Default
None
Command Mode EXEC
Security 1397