Users Guide

Delay-Restore Orphan-Port Ignore VLTi Fail enabled interfaces : Eth1/1/10
Po4
Supported
Releases
10.5.2.0 or later
show vlt backup-link
Displays detailed status of the heartbeat
Syntax
show vlt domain-id backup-link
Parameters domain-id — Enter the VLT domain ID.
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show vlt 255 backup-link
VLT Backup Link
------------------------
Destination : 10.16.208.164
Peer Heartbeat status : Up
Heartbeat interval : 1
Heartbeat timeout : 3
Supported
Releases
10.3.1E or later
show vlt egress-mask-rule
Displays the egress mask rules that are installed in the hardware.
Syntax
show vlt id egress-mask-rule
Parameters id—Enter the VLT domain ID, from 1 to 255.
Default Not configured
Command Mode EXEC
Usage
Information
Use this command to view the egress mask rules that are installed in the hardware.
Use this command to provide information to Technical Support for troubleshooting issues in your network.
The output of the show tech-support command includes this command output as well.
Supported platforms include S3048-ON, S4048-ON, S4048T-ON, S4100-ON series, S5200-ON series,
S6010-ON, Z9100-ON, Z9264F-ON, and Z9332F-ON switches.
Security and
Access
No restrictions
Example
OS10# show vlt 1 egress-mask-rule
Default egress Mask: Avoids loops before computing and applying the
actual egress mask
in the data plane.
Egress mask:
In-ports qualifier : ethernet1/1/1-1/1/2
Blocked ports : ethernet1/1/1-1/1/2, 1/1/10-1/1/14, 1/1/16
1652 Virtual Link Trunking