Users Guide

Security and
Access
Netadmin and sysadmin
Usage
Information
None
Example -
Boundary clock
OS10# show ptp clock
PTP Clock : Boundary
Clock Identity : 68:4f:64:ff:ff:01:db:ec
Grandmaster Clock Identity : 00:16:00:ff:fe:00:02:00
Clock Mode : One-step
Clock Quality
Class : 248
Accuracy : <=100ns
Offset Log Scaled Variance : 0
Domain : 0
Priority1 : 128
Priority2 : 128
Profile : System-default
Steps Removed : 1
Mean Path Delay(ns) : 68
Offset From Master(ns) : 6
Number of Ports : 2
Example -
End-to-end
transparent clock
OS10# show ptp clock
PTP Clock : End-to-end-transparent
Delay Mechanism : End-to-end
Supported
Releases
10.5.1.0 or later
show ptp counters
Displays the count of the PTP packets received at or transmitted from an interface.
Syntax
show ptp counters [{ethernet node/slot/port[:subport]} | {port-channel
port-channel-id}]
Parameters
● ethernet node/slot/port—Enter the Ethernet interface information.
● port-channel port-channel-id—Enter the port channel interface number.
Defaults None
Command Mode EXEC
Security and
Access
Netadmin and sysadmin
Usage
Information
This command displays the count of packets that are received or transmitted from the logical PTP port
corresponding to the interface network address. This count does not correlate with the interface packet
count. This command is not applicable for transparent clocks.
Example
OS10# show ptp counters
Interface : ethernet1/1/22
Port No : 1
Total Announce messages Sent : 4061
Total Announce messages Received : 2375569
Total Sync messages Sent : 259876
Total Sync messages Received : 2375568
Total Follow Up messages Sent : 0
Total Follow Up messages Received : 0
Total Delay Request messages Sent : 74377
Total Delay Request messages Received : 0
Total Delay Response messages Sent : 0
Total Delay Response messages Received : 74371
Total Management messages Sent : 0
230 System management