Users Guide

Total Management messages Received : 0
Total Signaling messages Sent : 0
Total Signaling messages Received : 0
Summary:
Tx messages : 338314
Rx messages : 4825508
Lost messages : 8217
Interface : ethernet1/1/23
Port No : 2
Total Announce messages Sent : 41249
Total Announce messages Received : 0
Total Sync messages Sent : 2639919
Total Sync messages Received : 0
Total Follow Up messages Sent : 0
Total Follow Up messages Received : 0
Total Delay Request messages Sent : 0
Total Delay Request messages Received : 2392374
Total Delay Response messages Sent : 2392374
Total Delay Response messages Received : 0
Total Management messages Sent : 0
Total Management messages Received : 0
Total Signaling messages Sent : 0
Total Signaling messages Received : 0
Summary:
Tx messages : 5073542
Rx messages : 2392374
Lost messages : 0
Supported
Releases
10.5.1.0 or later
show ptp foreign-masters
Displays PTP information about foreign masters.
Syntax
show ptp foreign-masters [{ethernet node/slot/port[:subport]} | {port-
channel port-channel-id}]
Parameters
● ethernet node/slot/port—Enter the Ethernet interface information.
● port-channel port-channel-id—Enter the port channel interface number.
Defaults None
Command Mode EXEC
Security and
Access
Netadmin and sysadmin
Usage
Information
The maximum number of foreign master data set entries is 10. This command is not applicable for
transparent clocks.
Example
OS10# show ptp foreign-masters
Interface : Ethernet1/1/22
-------------------------------------------------------------------------
Index Port-Identity Clock Clock Offset GM GM Announce Receiver
Class Accuracy Variance Pri1 Pri2 Msgs # Interface
-------------------------------------------------------------------------
0(Best)00:16::1 6 <=100ns 0 100 128 437 eth1/1/22
-------------------------------------------------------------------------
Supported
Releases
10.5.1.0 or later
System management 231