Users Guide

Table 6. New in 10.5.2.1
Revision Date Feature Description
interface-ID (option 18) and
remote-ID (option 37).
Configuring BGP templates Ability to configure the
BGP templates to support
the following attributes in
IPv4 and IPv6 address
family level: next-hop-self,
soft re-configuration inbound,
maximum-prefix, and add-
path.
Initiate SSH session with
another switch
Support to enable or disable
the ssh command that lets
you establish a connection
between two switches.
Table 7. New in 10.5.2.0 (continued)
Revision Date Feature Description
A00 2020–09-25 Private VLANs Private VLANs provide L2 isolation between ports within the
same VLAN. This section includes:
● Overview
● Configuration
● PVLAN interaction with other features
● IGMP and MLD snooping on PVLAN
● PVLAN with VLT
● Examples
● CLI commands
IPv6 RA guard IPv6 RA guard:
● Overview
● Configuration
● CLI commands
Multicast enhancements:
● VLT multicast peer-routing
timer
● Update RP mapping cache with
new RP configuration
● Anycast RP using PIM
● PIM join filters
● PIM neighbor filters
● PIM register filters
● Description
● Configuration
● CLI commands
Redistribute Route feature
enhancements in BGP and OSPF
Advertise inactive route paths:
● Description
● Configuration
● CLI commands
SSH Smart Card Authentication SSH smart card authentication:
● Remote user authentication by smart card and password
● Local user authentication by smart card with password
● Local user authentication by smart card without a
password
● General X.509v3 configuration for X.509v3 SSH
authentication
● Configuration of remote user authentication by smart
card and password
Change history 35