Users Guide

Table 64. High-level configurations on FSB1, FSB3, and FCF1
FSB1/FSB2 FSB3/FSB4 FCF1/FCF2
1. Enable FIP snooping.
2. Enable DCBX.
3. Create FCoE VLAN and configure FIP
snooping.
4. Create class-maps.
5. Create policy-maps.
6. Create a qos-map.
7. Configure port channel.
8. Configure VLTi interface member
links.
9. Configure VLT domain.
10. Configure VLAN.
11. Apply QoS configurations
on uplink (FSB3/FSB4) and
downlink interfaces (CNA-1/CNA-2).
Configure the uplink interface as
pinned-port.
12. Configure FIP snooping port mode on
the uplink interface.
1. Enable FIP snooping.
2. Enable DCBX.
3. Create FCoE VLAN and configure FIP
snooping.
4. Create class-maps.
5. Create policy-maps.
6. Create a qos-map.
7. Configure port channel.
8. Configure VLTi interface member
links.
9. Configure VLT domain.
10. Configure VLAN.
11. Apply QoS configurations on the
uplink (FCF1/FCF2) and downlink
interfaces (FSB1/FSB2). Configure
the downlink interface as pinned-
port.
12. Configure FIP snooping port mode
on the uplink interface and the port
channel.
1. Enable Fiber Channel F-Port mode
globally.
2. Create zones.
3. Create zoneset.
4. Create a vfabric VLAN.
5. Create vfabric and activate the
zoneset.
6. Enable DCBX.
7. Create class-maps.
8. Create policy-maps.
9. Create a qos-map.
10. Apply QoS configurations on the
downlink interface (FSB3/FSB4).
11. Apply vfabric on the downlink and
uplink (target-connected) interfaces.
FSB1 configuration
1. Enable FIP snooping.
FSB1(config)# feature fip-snooping with-cvl
2. Enable DCBX.
FSB1(config)# dcbx enable
3. Create FCoE VLAN and configure FIP snooping.
FSB1(config)#interface vlan1001
FSB1(conf-if-vl-1001)# fip-snooping enable
FSB1(conf-if-vl-1001)# no shutdown
FSB1(config)#interface vlan1002
FSB1(conf-if-vl-1002)# fip-snooping enable
FSB1(conf-if-vl-1002)# no shutdown
4. Create class-maps.
FSB1(config)# class-map type network-qos c3
FSB1(config-cmap-nqos)# match qos-group 3
FSB1(config)# class-map type queuing q0
FSB1(config-cmap-queuing)# match queue 0
FSB1(config-cmap-queuing)# exit
FSB1(config)# class-map type queuing q3
FSB1(config-cmap-queuing)# match queue 3
FSB1(config-cmap-queuing)# exit
5. Create policy-maps.
FSB1(config)# policy-map type network-qos nqpolicy
FSB1(config-pmap-network-qos)# class c3
464
Fibre Channel