Users Guide

Table 68. Fields and Descriptions
Fields Description
Re-distributed Number of sessions redistributed for better load balancing in the
interface
Example
OS10#show npg node-interfaces vfabric 100
VFabric Id : 100
--------------------------------------------------
Node Intf FLOGI FDISC Re-distributed
--------------------------------------------------
Fc 1/1/9 1 1 2
Fc 1/1/10 1 1 2
Eth 1/1/54 1 1 2
Eth 1/1/55 1 9 10
OS10#show npg node-interfaces
VFabric Id : 100
Node Intf FLOGI FDISC Re-distributed
---------------------------------------------------
Fc 1/1/9 1 1 2
Fc 1/1/10 1 1 2
Eth 1/1/54 1 1 2
Eth 1/1/55 1 9 10
VFabric Id : 200
Node Intf FLOGI FDISC Re-distributed
---------------------------------------------------
Fc 1/1/7 1 1 2
VFabric Id : 300
Node Intf FLOGI FDISC Re-distributed
---------------------------------------------------
Eth 1/1/51 1 9 10
Supported
Releases
10.5.2.0 or later
show npg uplink-interface
Display information in a FC upstream interface.
Syntax
show npg uplink-interfaces [vfabric vfabric-id [fcf-info] | [fcf-info]]
Parameters
● fcf-info - FCF Availability Status, fabric name of the FC upstream switch connected, error reason,
FCF advertisement delay timeout left and duplicate FC id assignment counter.
Default Not configured
Command Mode EXEC
Usage
Information
Displays the details of FC upstream interfaces in all the available or specified vFabrics along with the FC Id
and BB Credit.
This command is supported in NPG mode.
The fields and the corresponding descriptions are described as follows:
● Uplink Intf—The name of the FC uplink interface.
● FCF Availability Status—Status of the logical FCF of that fabric, whether it is available to establish
session or not. This field takes values as Yes or No.
● FAD timeout left—Number of seconds left for the FCF Advertisement Delay timer to expire.
● Upstream fabric name—Fabric name of the upstream FC switch/Multi-switch to which this interface
is connected.
518 Fibre Channel