Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4248FB-ON /S4248FBL-ON
51525354555657585960
Table Of Contents
show version
Displays software version information.
Syntax
show version
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show version
Dell EMC Networking OS10 Enterprise
Copyright (c) 1999-2021 by Dell Inc. All Rights Reserved.
OS Version: 10.5.2.4
Build Version: 10.5.2.4.215
Build Time: 2021-04-11T21:35:41+0000
System Type: S5248F-ON
Architecture: x86_64
Up Time: 1 day 00:54:13
Supported
Releases
10.2.0E or later
Baremetal switch with only ONIE installed
If your Dell EMC ONIE-enabled switch does not have a default OS installed, you can download an OS10 software image from the
Dell Digital Locker and install it using ONIE. Also, install OS10 on a Dell EMC ONIE device when:
● You convert a switch from OS9 or any third-party OS.
● You receive a replacement device from Dell EMC return material authorization (RMA).
An OS10 image that you download has a 120-day trial license and requires a perpetual license to run beyond the trial period. For
more information, see the Setup Guide that is shipped with your device and the following FAQs:
● Frequently asked Questions
● My Account FAQs
To install an OS10 image and extend the OS10 license beyond the trial period on a Dell EMC ONIE switch with no OS installed:
1. (Optional) If a different OS is installed on the switch, such as OS9 or a third-party OS, uninstall the existing OS — Uninstall
existing OS.
2. Download an OS10 image.
3. Install OS10 using ONIE.
4. Log in to the switch.
5. Download and install an OS10 license.
Related ONIE documentation
For additional information about using ONIE, see:
● ONIE User Guide
● ONIE – Manually Loading DNOS on a Switch
Upgrading OS9 to OS10
When you upgrade an OS9 switch to OS10, the first step is to uninstall OS9 using the ONIE: Uninstall OS option on the
ONIE boot menu. The Uninstall option deletes the OS9 configuration and all disk partitions. After you uninstall OS9, follow the
steps for an ONIE switch without an OS installed — see Download OS10 image, Installation using ONIE, and Install OS10 license.
RMA replacement
A replacement switch comes without an OS or license installed. If you receive a replacement switch, you must assign the service
tag (STAG) of the replacement switch to the SW entitlement in DDL and install the OS10 software and license.
54
Getting Started with Dell EMC SmartFabric OS10