Users Guide

Table Of Contents
Usage
Information
None
Example
OS10(config)# lldp med fast-start-repeat-count 5
Supported
Releases
10.2.0E or later
lldp med
Enables or disables LLDP-MED on an interface.
Syntax
lldp med {enable | disable}
Parameters
enable Enable LLDP-MED on the interface.
disable Disable LLDP-MED on the interface.
Default Enabled with network-policy TLV
Command Mode INTERFACE
Usage
Information
LLDP-MED communicates the types of TLVs that the endpoint device and network-connectivity device
support. Use the no lldp med or lldp med disable command to disable LLDP-MED on a specific
interface.
Example
OS10(conf-if-eth1/1/1)# lldp med disable
Supported
Releases
10.2.0E or later
lldp med network-policy
Manually defines an LLDP-MED network policy.
Syntax
lldp med network-policy number app {voice | voice-signaling | guest-
voice | guestvoice-signaling | softphone-voice | streaming-video | video-
conferencing | video-signaling} {vlan vlan-id vlan-type {tag | untag}
priority priority dscp dscp value}
Parameters
number Enter a network policy index number, from 1 to 32.
app Enter the type of applications available for the network policy:
voice Voice network-policy application
voice-signaling Voice-signaling network-policy application
guest-voice Guest voice network-policy application
guestvoice-signaling Guest voice signaling network policy application
softphone-voice SoftPhone voice network-policy application
streaming-video Streaming video network-policy application
video-conferencing Voice conference network-policy application
video-signaling Video signaling network-policy application
vlan vlan-id Enter the VLAN number for the selected application, from 1 to 4093.
vlan-type Enter the type of VLAN the application uses.
tag Enter a tagged VLAN number.
untag Enter an untagged VLAN number.
priority priority Enter the user priority set for the application.
dscp dscp value Enter the DSCP value set for the application.
Default Not configured
Command Mode CONFIGURATION
578 Layer 2