Users Guide

Table Of Contents
spanning-tree msti
Configures the MSTI, cost, and priority values for an interface.
Syntax
spanning-tree msti instance {cost cost | priority value}
Parameters
msti instance Enter the MST instance number, from 0 to 63. For Z9332F-ON platform, enter a
MST instance value from 0 to 61.
cost cost (Optional) Enter a port cost value, from 1 to 200000000. Default values:
100 Mb/s Ethernet interface = 200000
1-Gigabit Ethernet interface = 20000
10-Gigabit Ethernet interface = 2000
Port-channel interface with one 100 Mb/s Ethernet = 200000
Port-channel interface with one 1 Gigabit Ethernet = 20000
Port-channel interface with one 10 Gigabit Ethernet = 2000
Port-channel with two 1 Gigabit Ethernet = 18000
Port-channel with two 10 Gigabit Ethernet = 1800
Port-channel with two 100 Mbps Ethernet = 180000
priority value Enter a value in increments of 16 as the priority, from 0 to 240, default 128.
Default Priority value is 128
Command Mode INTERFACE
Usage
Information
The cost value is based on the interface type. The greater the cost value, the less likely the port is
selected to be a forwarding port. The priority influences the likelihood that a port is selected to be a
forwarding port if several ports have the same cost value.
Example
OS10(conf-if-eth1/1/1)# spanning-tree msti 1 priority 0
OS10(conf-if-eth1/1/1)# spanning-tree msti 1 cost 3
Supported
Releases
10.2.0E or later
spanning-tree mst configuration
Enters MST mode to configure MSTP from Configuration mode.
Syntax
spanning-tree mst configuration
Parameters None
Default Disabled
Command Mode CONFIGURATION
Usage
Information
Use this command to enter STP MST configuration mode.
Example
OS10(config)# spanning-tree mst configuration
OS10(conf-mst)#
Supported
Releases
10.2.0E or later
spanning-tree mst disable
Disables spanning tree on the specified MST instance.
Syntax
spanning-tree mst instance-number disable
Parameters instance-numberEnter the instance number, from 0 to 63.For Z9332F-ON platform, enter a MST
instance value from 0 to 61.
634 Layer 2