Users Guide

Table 9. MX7000 components (continued)
Component Version
Qlogic 26XX series Fibre Channel adapters 15.05.12
Qlogic 27XX series Fibre Channel adapters 15.05.12
Qlogic 41xxx series adapters 15.05.14
Mellanox ConnectX-4 Lx Ethernet Adapter Firmware 14.25.80.00
Intel NIC Family Version 19.5.x Firmware for X710, XXV710,
and XL710 adapters
19.5.12
Emulex Fibre Channel Adapter Firmware 03.02.18
OpenManage Enterprise Modular 1.10.20
MX9116n Fabric Switching Engine OS10 10.5.0.5
MX5108n Ethernet Switch OS10 10.5.0.5
NOTE: As these update instructions include updates to various components of the solution, there is a possibility of traffic
impact to existing workloads. It is highly recommended to apply the updates only during a regular maintenance.
NOTE: After updating all applicable solution components, it is recommended to reboot compute hosts.
Update Order Instructions:
Before proceeding with the update, review and resolve any recurring port alerts reported in the OME Modular Alerts page.
● Message Id for port "operational" and "not operational" is NINT0001 and NINT0002.
1.
Update component " iDRAC with Lifecycle Controller " via
OME Modular.
a. If OME Modular is managing a "Chassis Group", then
login to OME Modular of the Lead chassis.
b. From the global menu, click
Devices and select
Compute from the dropdown.
c. This lists all the available Compute devices in the chassis
or chassis group.
d. Select the checkbox to select all the Compute devices
in the current page. If there are multiple pages, then
navigate to each page and select the checkbox.
e. Once all the Compute devices in all the pages are
selected, click "
Update Firmware " menu button.
f. In the popup wizard, select the individual package and
click Browse button to select the " iDRAC with Lifecycle
Controller " DUP.
g. Once the DUP is uploaded, click
Next and select the
Compliance checkbox. Click Finish to start the update
on all the Compute devices.
h. Allow the job to complete before proceeding to Step 2.
2. Repeat Step 1 instructions to update components " Dell
EMC Server BIOS PowerEdge MX740c " and " Dell EMC
Server BIOS PowerEdge MX840c" as applicable.
3. Repeat Step 1 instructions to update components " Qlogic
26XX series Fibre Channel adapters ", "Qlogic 27XX series
Fibre Channel adapters", "Qlogic 41xxx series adapters",
"Mellanox ConnectX-4 Lx Ethernet Adapter Firmware",
"Intel NIC Family Version 19.5.x Firmware for X710, XXV710
and XL710 adapters", and "Emulex Picard-16/Picard-32
adapters" as applicable. It is recommended to visit Dell.com
4. Update component "OpenManage Enterprise Modular" .
a. If OME Modular is managing a "Chassis Group", then
login to OME Modular of the Lead chassis.
b. If the current version is either 1.10.00 or 1.10.10, skip to
Step 4d.
Getting Started with Dell EMC SmartFabric OS10 67