Users Guide

Parameters
● management—Enter the keyword management to configure a domain list for the management VRF
instance.
● vrf-name—Enter the name of the non-default VRF instance to configure a domain list for that
non-default VRF instance.
● domain-names—Enter the list of domain names.
Default Not configured
Command Mode CONFIGURATION
Usage
Information
The no version of this command removes the domain list configuration from the management or the
non-default VRF instance.
Example
OS10(config)# ip domain-list vrf management dns1 dell.com
or
OS10(config)# ip domain-list vrf blue dnsl dell.com
Supported
Releases
10.4.0E(R1) or later
ip domain-name vrf
Configures a domain name for the management VRF instance or any non-default VRF instance that you create.
Syntax
ip domain—name vrf {management | vrf-name} domain-name
Parameters
● management—Enter the keyword management to configure a domain name for the management
VRF instance.
● vrf-name—Enter the name of the non-default VRF instance to configure a domain name for that
VRF instance.
● domain-name—Enter the domain name.
Default Not configured
Command Mode CONFIGURATION
Usage
Information
The no version of this command removes the domain name from the management or non-default VRF
instance.
Example
OS10(config)# ip domain-name vrf management dell.com
or
OS10(config)# ip domain-name vrf blue dell.com
Supported
Releases
10.4.0E(R1) or later
ip vrf
Create a non-default VRF instance.
Syntax
ip vrf vrf-name
Parameters
● vrf-name—Enter the name of the non-default VRF that you want to create. Enter a VRF name that
is not greater than 32 characters in length.
Default Not configured
Command Mode CONFIGURATION
Usage
Information
Enter the ip vrf vrf-name command only in non-transaction-based configuration mode. Do not use
transaction-based mode. You can create up to a maximum of 128 non-default VRF instances. The no ip
vrf vrf-name command removes the non-default VRF instance that you specify.
756 Layer 3