Users Guide

Usage
Information
Enable or disable outbound optimization dynamically to reset all neighbor sessions. When you enable
outbound optimization, all peers receive the same update packets. The next-hop address chosen as one
of the addresses of neighbor’s reachable interfaces is also the same for the peers. The no version of this
command disables outbound optimization.
NOTE: To configure these settings for a nondefault VRF instance, you must first enter the ROUTER-
CONFIG-VRF sub mode using the following commands:
1. Enter the ROUTER BGP mode using the router bgp as-number command.
2. From the ROUTER BGP mode, enter the ROUTER BGP VRF mode using the vrf vrf-name
command.
Example
OS10(conf-router-bgp-10)# outbound-optimization
Supported
Releases
10.3.0E or later
password
Configures a password for message digest 5 (MD5) authentication on the TCP connection between two neighbors.
Syntax
password {9 encrypted password-string| password-string}
Parameters
● 9 encrypted password-string—Enter 9 then the encrypted password.
● password-string—Enter a password for authentication. A maximum of 128 characters.
Default Disabled
Command Mode
ROUTER-NEIGHBOR
ROUTER-TEMPLATE
Usage
Information
You can enter the password either as plain text or in encrypted format. The password that is provided
in ROUTER-NEIGHBOR mode takes preference over the password in ROUTER-TEMPLATE mode. The no
version of this command disables authentication.
Example
OS10(conf-router-neighbor)# password abcdell
OS10(conf-router-neighbor)# password 9
f785498c228f365898c0efdc2f476b4b27c47d972c3cd8cd9b91f518c14ee42d
Supported
Releases
10.3.0E or later
redistribute
Redistributes connected, static, and OSPF routes in BGP.
Syntax
redistribute {connected [route-map map name] | imported-bgp-routes {vrf
vrf-name} [route-map map-name] | ospf process-id [route-map map name] |
static [route-map map name]}
Parameters
● connected — Enter to redistribute routes from physically connected interfaces.
● imported-bgp-routes {vrf vrf-name} [route-map map-name] — Enter to redistribute
leaked BGPv4 routes.
● route-map map name — (Optional) Enter the name of a configured route-map.
● ospf process-id — Enter a number for the OSPF process (1 to 65535).
● static — Enter to redistribute manually configured routes.
Default Disabled
Command Mode ROUTER-BGPv4-AF or ROUTER-BGPv6-AF
Layer 3 863