Users Guide

show ipv6 ospf database
Displays all LSA information. You must enable OSPFv3 to generate output.
Syntax
show ipv6 ospf process-id [vrf vrf-name] database
Parameters
● process-id — Enter the OSPFv3 process ID to view a specific process. If you do not enter a
process ID, the command applies to all the configured OSPFv3 processes.
● vrf vrf-name — Enter the keyword vrf followed by the name of the VRF to display LSA
information for that VRF.
Default Not configured
Command Mode EXEC
Usage
Information
● Link ID—Identifies the router ID.
● ADV Router—Identifies the advertising router’s ID.
● Age—Displays the LS age.
● Seq#—Identifies the LS sequence number. This identifies old or duplicate LSAs.
● Checksum—Displays the Fletcher checksum of an LSA’s complete contents.
● Link count—Displays the number of interfaces for that router.
● Rtr Count—Displays the router count.
● Dest RtrID—Displays the destination router ID.
● Interface—Displays the interface type.
● Prefix—Displays the prefix details.
Example
OS10# show ipv6 ospf database
OSPF Router with ID (10.0.0.2) (Process ID 200)
Router Link States (Area 0.0.0.0)
ADV Router Age Seq# Fragment ID Link count Bits
-------------------------------------------------------------------
1.1.1.1 1610 0x80000144 0 1 B
2.2.2.2 1040 0x8000013A 0 1
10.0.0.2 1039 0x80000002 0 1
Net Link States (Area 0.0.0.0)
ADV Router Age Seq# Link ID Rtr count
----------------------------------------------------------
2.2.2.2 1045 0x80000001 5 2
Inter Area Router States (Area 0.0.0.0)
ADV Router Age Seq# Link ID Dest RtrID
---------------------------------------------------------------
1.1.1.1 1605 0x80000027 1 3.3.3.3
Link (Type-8) Link States (Area 0.0.0.0)
ADV Router Age Seq# Link ID Interface
--------------------------------------------------------------------
1.1.1.1 1615 0x80000125 5 ethernet1/1/1
2.2.2.2 1369 0x8000011B 5 ethernet1/1/1
10.0.0.2 1044 0x80000001 5 ethernet1/1/1
Type-5 AS External Link States
ADV Router Age Seq# Prefix
--------------------------------------------------------------------------
3.3.3.3 3116 0x80000126 400::/64
3.3.3.3 3116 0x80000124 34::/64
Supported
Releases
10.3.0E or later
show ipv6 ospf interface
Displays the configured OSPFv3 interfaces. You must enable OSPFv3 to display the output.
Syntax
show ipv6 ospf interface interface [vrf vrf-name]
Parameters
● interface — (Optional) Enter the interface information:
○ ethernet — Physical interface, from 1 to 48.
Layer 3 989