Concept Guide
Table Of Contents
- Dell EMC SmartFabric Services User Guide Release 1.0
- About this guide
- SFS fundamentals
- Setting up SFS
- Deploying and managing a fabric
- Access fabric setup options
- Update default fabric, switch names, and descriptions
- Create uplink for external network connectivity
- Breakout switch ports
- Configure jump host
- Update network configuration
- Onboard a server onto the fabric
- Edit default fabric settings
- Restore fabric configuration
- Manage network profiles
- Manage routing profiles
- Access fabric setup options
- SFS with VxRail
- SFS with PowerEdge MX
- SFS for Isilon/PowerScale back-end fabric
- SFS commands
- smartfabric l3fabric enable
- smartfabric vlti
- show logging smartfabric
- show smartfabric cluster
- show smartfabric cluster member
- show smartfabric configured-server
- show smartfabric configured-server configured-server-interface
- show smartfabric details
- show smartfabric discovered-server
- show smartfabric discovered-server discovered-server-interface
- show smartfabric networks
- show smartfabric nodes
- show smartfabric personality
- show smartfabric uplinks
- show smartfabric upgrade-status
- show smartfabric validation-errors
- show switch-operating-mode
- Appendix
Virtual Networks—Displays only the virtual networks available in the fabric.
Delete a network profile
You can delete a network profile:
1. Click the Networks or Virtual Networks tab and select a profile from the list.
2. Click Delete.
3. Click Ok to confirm.
Manage routing profiles
You can view and manage the routing profiles that are configured in SFS. You can delete a routing profile from this tab. The
routing profiles are created as part of uplink configuration workflow. The routing profile name is configured as policy ID and you
cannot apply a routing profile to multiple uplinks with the same profile name. You can apply the same routing configuration for
multiple uplinks by providing different profile names.
Click the Routing Profiles tab to view the list of all routing profiles that are configured in a fabric. The routing profiles listing in
this page are user-configured profiles and you cannot edit the automated internal routing configurations. For more information,
see Routing profiles.
Deploying and managing a fabric
35