Concept Guide
MIB Object OID Description
dot3adAggPortListPorts 1.2.840.10006.300.43.1.1.2.1.1 Contains a complete set of ports currently
associated with the Aggregator.
Viewing the LAG MIB
• To view the LAG MIB generated by the system, use the following command.
snmpbulkget -v 2c -c LagMIB 10.16.148.157 1.2.840.10006.300.43.1.1.1.1.1
iso.2.840.10006.300.43.1.1.1.1.1.1258356224 = Hex-STRING: 00 01 E8 8A E8 46
iso.2.840.10006.300.43.1.1.1.1.1.1258356736 = Hex-STRING: 00 01 E8 8A E8 46
iso.2.840.10006.300.43.1.1.1.1.2.1258356224 = INTEGER: 32768
iso.2.840.10006.300.43.1.1.1.1.2.1258356736 = INTEGER: 32768
iso.2.840.10006.300.43.1.1.1.1.3.1258356224 = Hex-STRING: 00 01 E8 8A E8 44
iso.2.840.10006.300.43.1.1.1.1.3.1258356736 = Hex-STRING: 00 01 E8 8A E8 44
iso.2.840.10006.300.43.1.1.1.1.4.1258356224 = INTEGER: 1
iso.2.840.10006.300.43.1.1.1.1.4.1258356736 = INTEGER: 1
iso.2.840.10006.300.43.1.1.1.1.5.1258356224 = INTEGER: 127
iso.2.840.10006.300.43.1.1.1.1.5.1258356736 = INTEGER: 128
MIB support for Port Security
Dell EMC Networking OS provides MIB objects to enable or disable port security feature on the physical and port channel interfaces.
The port security DELL-NETWORKING-PORT-SECURITY-MIB object contains both the global and interface level MIB objects.
Global MIB objects for port security
This section describes about the scalar MIB objects of the global MIB dellNetPortSecGlobalObjects.
The following table shows the scalar global MIB objects for port security.
Table 119. Global MIB Objects for Port Security
MIB Object OID Access or Permission Description
dellNetGlobalPortSecurityMode 1.3.6.1.4.1.6027.3.31.1.1.1 read-write Enables or disables port security feature
globally on the device.
dellNetGlobalTotalSecureAddress 1.3.6.1.4.1.6027.3.31.1.1.2 read-only Displays the total number of MAC
addresses learnt or congured in the
device.
dellNetGlobalClearSecureMacAd
dresses
1.3.6.1.4.1.6027.3.31.1.1.3 read-write Deletes all the secured MAC addresses in
the system based on the specic type
(sticky or dynamic).
dellNetGlobalResetViolationStatu
s
1.3.6.1.4.1.6027.3.31.1.1.4 read-write Resets the violation status (Err-disabled
state) of all violated interfaces based on
the specied type (MAC limit or station
move violation).
916 Simple Network Management Protocol (SNMP)